Get Started

Before we can get started to design lift system / vertical transportation system the following step need to be considered.

1. The height of the building will determine minimum lift speed required (before conducting traffic analysis)

2. Population of the building (very important for traffic analysis - proper assumption will determine better result in the traffic analysis)

3. Number of stop. (need to check either single door opening or double door opening)

4. TO BE CONTINUE ....

Lift Requirement Comparision (Lift Pit Depth)

Following the comparision between all lift manufacturer that need to be taken into account before designing the lift system (Vertical transportation services/ installation)

1. Motor Roomless Lift

a. Schindler
> 1.0m/s - overhead 4400mm, Lift pit 1650mm
> 1.5m/s - overhead 4400mm, Lift pit 1650mm
> 1.75m/s - overhead 4400mm, Lift pit 1650mm

b. KONE
> 1.0m/s - overhead 3750mm, Lift pit 1400mm
> 1.5m/s - overhead 3850mm, Lift pit 1450mm
> 1.75m/s - overhead 3850mm, Lift pit 1450mm

c. Royden (Mitshubishi Lift)
> 1.0m/s - overhead 4100mm, Lift pit 1550mm
> 1.5m/s - overhead 4250mm, Lift pit 1650mm
> 1.75m/s - overhead 4350mm, Lift pit 1700mm

d. MS Elevator (Toshiba)
> 1.0m/s - overhead 4500mm, Lift pit 1700mm
> 1.5m/s - overhead 4500mm, Lift pit 1700mm
> 1.75m/s - overhead 4500mm, Lift pit 1700mm

e. Pernas OTIS
> 1.0m/s - overhead 3820mm, Lift pit 1300mm
> 1.5m/s - overhead 3950mm, Lift pit 1350mm
> 1.75m/s - overhead 4000mm, Lift pit 1400mm

2. Motor Room Lift

-to be continue

Introduction

Lift Supplier In Malaysia

In Malaysia there are a few lift manufacturer / supplier that active promoting their product to all costumer.

They are : -

1. MS Elevator Eng. (M) Sdn Bhd

2. Antah Schindler Sdn Bhd

3. KONE Elevator

4. Royden (M) Sdn Bhd

5. Fujitec

6. Hitachi

8. Pernas Otis